Cost to Paint Windows and Door Frames in Edmonton

Painting exterior windows and door frames in Edmonton usually costs $100 to $250 per window or door frame, with most homeowners spending around $1,000 to $2,500 to paint all exterior frames on a home. Specialty windows cost more: French windows can cost up to $1,000, while dormers may range from $1,000 to $3,000 depending on height, access difficulty, condition, preparation, caulking, repairs, primer, paint quality, and weather. For the longest-lasting result, exterior frames should be cleaned, sanded where needed, primed, painted with two coats of exterior paint, and sealed when appropriate.

 

 

 

Here are the estimated costs of painting exterior windows and door frames in Edmonton:

• $100 per window or door frame for lower-end services.
• Up to $250 per frame for higher-end services.
• Most of the homeowners spend $1000 to $2500 to paint all frames.
• French windows can cost up to $1000.
• Dormers are the most expensive kind of window. Depending on the difficulty of the task, they start at $1,000 up to $3000.

 

The process to Paint Exterior Windows and Door Frames

When painting your exterior windows and door frames, be sure to read your home’s type of exterior. The process will be much easier if you have this information. Don’t ask what paint and primer to use. Just buy the best you can afford.

Most of the houses in Edmonton are made of aluminum and vinyl. There are a few homes that have wood that can change the price.

Step 1 – Clean the windows and door frames using a damp cloth. You may use soap and water if you want. Just make sure you clean the frame thoroughly as well as the glass. Sand if needed.

Step 2 – Apply primer to the window and door frames. Make sure you apply enough to cover the entire surface.

Step 3 – Let the primer dry completely before applying the second coat. If the weather permits, wait until the day after the application to do so.

Step 4 – Once the paint dries, sand the edges of the window and door frames to remove any overspray.

Step 5 – Use a brush to apply two coats of exterior paint. Allow each coat to dry fully before moving on to the next step.

Step 6 – Seal the window and door frames with a clear acrylic sealer.

 

How much time does it take to paint windows or door frames?

There is no precise answer for this. But we allocate one to two hours per unit. However, sometimes we might face unexpected surprise that takes more time than usual. Some of the conditions that might affect:

• Amount of preparation it requires.
• Difficulty to paint, how high is the window or height of the door?
• Condition, whether it’s new or needs a repaint.
• Extra work like caulking, repair, etc.
• Weather condition.

Frame Type	Estimated Cost	Notes
Standard window frame	$100–$250 per frame	Depends on size, height, paint type, and prep
Standard exterior door frame	$100–$250 per frame	Cost increases with sanding, caulking, or repair work
Whole-home frame painting	$1,000–$2,500	Common range for painting all exterior frames
French windows	Up to $1,000	More detailed work, extra glass masking, and more edges
Dormers	$1,000–$3,000	Highest cost due to height, access, roofline difficulty, and safety setup
High or difficult-access frames	Higher than average	May require ladders, scaffolding, or extra labour

 

Factors that Effect the Cost

Most painters have a fixed rate of painting windows and doors but in some conditions, that cost might not justify the work they do. In that case, they take some factors in consideration to increase or decrease the cost, these factors are:

Window Size

The size of your window is going to have a huge effect on how much paint you need to buy. Usually, a larger window requires more paint than a smaller window. If you live in a condo, then you may not even have room to install a window!

Painting Type

If you are having your windows painted outside, then you want to make sure that they are not being treated with any sealants. These types of products can cause the paint job to peel off over time.

Weather Conditions

Weather conditions play a big role in whether or not you should use a primer or not. If it’s raining or snowing, then you want to avoid using a primer. When the weather gets warm, however, you might consider using a primer to help protect the paint job.

Paint Quality

Paint quality is also very important. You don’t want to get cheap paint at Home Depot. Make sure that you choose high-quality paint that is formulated for exterior applications.

 

Surface Preparation

Surface preparation refers to the condition of the surface before you start painting. If the surface is dirty or damaged, you will need to clean it first. You’ll also want to remove any loose materials (such as nails) before applying the paint.

Amount of Paint Needed

Next, you will want to determine how much paint you need. A gallon of paint generally covers about 400 square feet, so if you have a 10′ x 10′ window, you will need 40 gallons of paint.

Application Method

You will also need to decide what type of application method you will use. There are two different methods: brush and roller. Brush application involves using a brush to apply the paint onto the surface while roller application uses a roller to cover the surface.

 

Get Free Quote

If you want to do some home exterior painting but don’t want to do the work yourself, our exterior painters can help. Even if you’re undecided, professional house painters can help you with any questions you may have.